main features - easy to integrate - 16 independent segments with simultaneous acquisition capabilities - 45-degree beam, for optimized feld of view - 0 to 50 meter (165 ft.) detection - rapid data acquisition time - 50 hz - ip67 weather-resistant enclosure - lcd display for confguring and monitoring ongoing operations leddar? technology offers the best cost/performance ratio. leddar? capabilities presence detection mode this is16 industrial leddar? sensor includes presence detection mode, where the pnp/npn outputs can be set according to whether or not there are objects within the confgured detection zones (two zones, one per output). with the teach confguration feature, the sensor can defne the perimeter of its surroundings as a detection zone. in quick mode , a near limit and a far limit can be easily confgured to quickly defne zones. alternatively, zones can also be confgured manually in advanced mode where near and far limits can be set for each segment and unwanted segments can be deactivated. raw measurements mode the is16 industrial leddar? sensor provides the capabilities to acquire all measurements, from all segments in real time through the rs-485 link. each measurement provides the distance of the detected object, the index of the segment it was detected in, and the intensity of the measurement (indication of how much light was refected of the object and captured by the sensor). is16 industrial leddar tm sensor at the heart of the is16 industrial leddar tm sensor lies patented leddar? technology, designed to detect, locate and measure all types of objectseither solid or liquid. the is16 industrial leddar? sensor provides both distance and angular positioning while performing continuous analysis of the area. specifcally designed for the industrial market, this unique sensor is optimized for 0 to 50 meter (165 ft.) detection and ranging applications. based on time-of-fight measurements using pulses from infrared leds, combined with 16 independent active segments, the is16 industrial leddar? sensor provides fast, accurate and non-stop detection and ranging. the 45-degree beam, produced by difused light pulses and processed through innovative algorithms, enables the detection of a wide range of objects under various environmental conditions. leddar? makes countless applications a reality! a custom zone can be defned and unneeded segments may be disabled presence detection mode raw measurements mode
system performance detection range 0 to 50 meters (165 ft.) 1 accuracy 5 cm data refresh rate up to 50 hz operating -40c to +50c temperature range acquisition 16 segments simultaneously distance precision 6 mm distance resolution 10 mm ingress protection ip67 power consumption 5.6 w 1 varies according to optics and target. beam options 45 o 2 discrete output 2 x pnp/npn analog output 4-20 ma 3 , 0-10 v 3 interfaces usb, rs-485 wavelength 940 nm meets iec 62471: exempt lamp classifcation 2006 criteria power supply 12 to 30 vdc dimensions 136 mm x 86 mm x 70 mm weight 430 g connector m12 human/machine optional control panel with lcd and 4 buttons interface experience the difference leddar? technology makes www.leddartech.com t: 1 418 653-9000 t: 1 855 865-9900 f: 1 418 653-9099 creator of the leddar tm technology amplitude vs. distance features 54a0015-4- 122013 - printed in canada - copyright leddartech inc. ? 2013 all rights reserved. leddar tm is a registered trademark of leddartech inc. leddar tm technology is covered by one or more of the following u.s. patents: 7635854, 7640122, 7855376, 7895007, 7917320, 8159660, 8242476, or international equivalents. other patents pending. the chart above displays the detection amplitude of a 45 o sensor for fve reference objects (photography grey cards and refective tape) of varying size and refectivity. the content of this datasheet is subject to change without notice ordering information product s = sensor beam 45 o 2 interfaces 10 = usb, rs-485 20 = usb, rs-485, 4-20ma 3 , 0-10 v 3 , npn/ pnp, lcd, buttons, indicators amplitude vs. distance amplitude (count) distance (m) 2.8 7.5 height width included with the leddar? sensor: - leddar? confguration software cd 2 contact leddartech for other optics options available upon request. 3 provision for future use. example: 45 beam option 10 3 10 2 10 1 10 0 10 -1 0 5 10 15 20 25 30 35 40 45 50 kodak grey card 90%, 20 x 25 cm kodak grey card 18%, 20 x 25 cm refective tape 5 x 10 cm lastolite target 90% refectivity, 75 x 75 cm lastolite target 18% refectivity, 75 x 75 cm led - s - xx - xx
|
